Sunday, May 17, 2009
How Do I Clean My Airsoft Gun?
Although in many cases, the internals are where the most cleaning needs to be done, this guide is intended to answer questions about the barrel of the airsoft gun only and is geard towards the "newbie" level player.
For those of you hoping to get info on cleaning the guts of the gun (I.e. the mechbox or valve assembly) I would strongly encourage you to take a look at either www.mechbox.com or the newer but promising www.airsoftdna.com. These sites will show you how to disassemble the guns to their individual components and cleaning is then simply a matter of you using your best judgment on how best to wipe the parts clean.
On to the guide!
There are a couple of different ways to clean an airsoft gun barrel but they all do the same thing; clean gunk off the inside of the smooth barrel which is in the airsoft gun. Because airsoft guns (usually) don't have rifled barrels (Barrels with spiral grooves cut into the inside of the barrel) you will not have to worry about getting crud out of these grooves. This means that the cleaning process is pretty simple. Basically, you are going to need to swab out the barrel using some oil and a cleaning patch (small square of fabric or paper). Bear in mind that the barrel of an airsoft gun is quite small (narrow diameter) and therefore, I have found that the best method of pushing the cleaning patch through the barrel is to use an airsoft cleaning rod. Generally, these rods come with the gun and are usually plastic. The plastic construction helps to prevent damaging the barrel and other parts on the and I would advise against using metal coat hangers or similar.
Before you get started, here are a couple of things to keep in mind:
ALWAYS, ALWAYS THINK SAFETY! This means making sure that your airsoft gun is completely unloaded, de-charged, de-gassed, de-cocked etc...
Once you've made sure the airsoft gun is safe begin the cleaing process:
#1 Turn the hop up off. That is, turn the hop up to the setting where the is NO back spin on the bbs. IF you don't do this, you risk damaging the hop up bucking with the cleaning patch/rod.
# 2 tear off a small piece of paper towel (approx. 1"x1") and bend it in half so it looks like a triangle. Thread one corner of the triangle through the eye (the slit) in the tip of the cleaning rod.
#3 Lubricate the cleaning patch with a few drops of silicone oil (DO NOT USE WD40!!!! as it can erode the rubber in the hop up and on the rest of the gun!!!)
#4 Using steady pressure, push the cleaning rod through the barrel from the tip of the barrel to the feed port of the gun. (I usually tip the gun on its back to see if the cleaning rod has reached the feed tube.) DO NOT APPLY TOO MUCH PRESSURE! if you feel an obstruction in the barrel, be VERY careful to make sure that the obstruction is a BB or something else. IF you feel the cleaning rod catch on something and you do not see the cleaning rod through the feed tube, you may have caught the hop up bucking and pushing too hard could ruin the bucking.)
#5 Once you've pushed the rod all the way down the barrel, pull it out and inspect it for dirt or other particulates. If the patch (the small piece of paper towel) is dirty, then remove it and replace it with a fresh cleaning patch, re-lubricate and repeat the cleaning process till the cleaning patches no longer come out of the barrel dirty.
If you follow these steps and use your common sense, you will be able to successfully, clean nearly any airsoft barrel.
Tuesday, April 28, 2009
Which Airsoft Gun Has the Best Range?
Q: I want a gun with good range, so which one should I get?
A: The answer is pretty simple (fortunately). Get the most qualitative brand you can afford in the model of AEG you like the look of the best. Don't worry whether its a replica of an "SMG", "Assault Rifle" or "Sniper Rifle". Bear in mind that I preface this by saying I am referring only to fully sized AEGs and not AEP (auto electric pistols). In other words, don't worry abot range, go for quality and looks.
Here is why this is the best advice I can give the new airsoft buyer:
Nearly all stock airsoft guns from any of the major manufacturers have approx. the same range because they all operate within roughly the same physical parameters.
Here's is what I mean:
Echo 1 guns usually fire at around 300-350 fps as do most other stock guns from JG, TSD, Classic Army, G&G, ICS and so on.
Additionally, most major airsoft fields place limits on players and require that the max FPS be achieved by using .20g bbs. (This means you can't beat the FPS limit by using .30g bbs during the chrono session to drop your FPS within field limits and then switch to lighter bbs to achieve higher velocity later in the game).
What you're left with is a formula that has a .20g bb (on average) traveling at not more than 350 fps (usually) that's being fired out of a smooth bore (unrifled) barrel.
When you realize that most airsoft guns on the field are limited to these approximate operating parameters then you start to see that the cosmetic differences of the gun's make and model start to matter little. Taking aftermarket upgrades out of the equation, the only advantage an "assault rifle" style airsoft gun would have over an "SMG" styled model, would be SOME barrel length (3-8 inches depending on the gun). Even this advantage can be misleading as barrel length in airsoft does not matter NEARLY as much as in the real steel namesakes.
One thing a lot of new players forget is that they are using REPLICAS of real steel guns. In the reel steel guns, much of the difference in range is the result of different cartridges that fire lighter or heavier bullets using more or less gun powder that burns at different rates and of course the somewhat complex interaction that all these factors have with the barrel length. Hence an MP5 in real life will lose a long range target shooting match to an M14.
However, in airsoft all the bbs are (Mostly) the same weight and traveling at the same speed, your max range is going to be about 125-150 feet and there is only so much that barrel length can do to help or hurt range. The odds are good that 125' will be pushing it and you won't be able to hit targets past that with any regularity.
Before I get inundated with claims that "I hit a soda can off my fence with my M14 and I know that it was 200' away", let me just say that claims about range are a lot like claims about fish. The numbers tend to be exageratted and 150' can easily turn into 175' when you're just eyeballing it.
I too suffered from the trap of eyeballing and guesstimation and I was surprised at how litte range I actually had when I measured out the targets. Still, after having tested dozens of different makes and models of airsoft gun I can say with assurance, that 150' is the maximum distance at which .20g bbs can be fired accurately using a flat or semi-flat trajectory. Believe me, I've measured these ranges time and again. Further, the claims that an "upgraded" hop up unit and tight bore barrel can improve your range in any significant way should really be filed with the fish stories.
Grouping size can be tightened by these upgrades and there can be a modest FPS boost, BUT, the physics of the equation do not change (.20g bbs @ 350 fps = max. effective range of 125'-150').
Also, bear in mind that any airsoft gun can be upgraded up the wazoo with heavier and more powerful springs and made to fire rediculously heavy (For an airsoft gun) bbs to achieve greater range. But, this misses the point as airsoft is a fun and friendly sport not intended to maim.
Hence, the REAL question to ask yourself before buying is not "does this gun have good range", but rather, "Is this gun well made?".
This question too is somewhat subjective and of course you're budget will be the final judge of how much quality you can afford. Still, there are PLENTY of choices out there and buyers should have little or no trouble finding sufficiently qualitative brands at all price points.
If you ask this question of yourself, then your buying decision becomes much easier and its one of the few times where, once you've picked the reputable brand, you can let looks alone guide you.
Stay safe and play hard!
-Konrad
Privacy Policy
Privacy
Airsoft Reports respects your privacy.
Any personal information you provide to us including and similar to your name, address, telephone number and e-mail address will not be released, sold, or rented to any entities or individuals outside of Airsoft Reports.
Credit card details
Airsoft Reports will never ask for Credit Card details and request that you do not enter it on any of the forms on Airsoft Reports.
External Sites.
Airsoft Reports is not responsible for the content of external internet sites. You are advised to read the privacy policy of external sites before disclosing any personal information.
Cookies
A "cookie" is a small data text file that is placed in your browser and allows Airsoft Reports to recognize you each time you visit this site(customisation etc). Cookies themselves do not contain any personal information, and Airsoft Reports does not use cookies to collect personal information. Cookies may also be used by 3rd party content providers such as newsfeeds.
Google Interest Based Advertising
* Google, as a third party vendor, uses cookies to serve ads on your site. * Google's use of the DART cookie enables it to serve ads to your users based on their visit to your sites and other sites on the Internet. * Users may opt out of the use of the DART cookie by visiting the Google ad and content network privacy policy.Remember The Risks Whenever You Use The Internet
While we do our best to protect your personal information, we cannot guarantee the security of any information that you transmit to Airsoft Reports and you are solely responsible for maintaining the secrecy of any passwords or other account information. In addition other Internet sites or services that may be accessible through Airsoft Reports have separate data and privacy practices independent of us, and therefore we disclaim any responsibility or liability for their policies or actions.
Please contact those vendors and others directly if you have any questions about their privacy policies.
For any other information email webmaster